Strength Material Lab Testing Equipment

Product Price :Get Latest Price

• Operation of the machines is by transfer of electronic signals of load from the test specimen through pressure transducer to a separately housed load indicator. The system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces.
• Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pressure transducer housed in the control panel. The transducer gives the signal to the electronic display unit corresponding the load exerted by the main ram. Simultaneously the digital electronic fitted on the straining unit gives the mechanical displacement to the electronic display unit. Both the signals are processed by the microprocessor and load and displacement is displayed on the digital readouts simultaneously.The displacement may be read from a linear scale fitted in the loading unit at a reduced price.

• This consists of a cylinder motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on to a robust base. The cylinder and the ram are individually lapped to eliminate friction. The upper cross-head is rigidly fixed to the table by two strengthened columns. The lower cross-head is connected to two screwed columns which are driven by a motor. Axial loading of the ram of any possible side loading by the provision of seatings. Manual adjustment of cross-head may be provided at a reduced price.
• Tension test is conducted by gripping the test specimen between the upper and lower cross-heads, Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table.
• The lower cross-head can be raised or lowered rapidly by operating the screwed columns thus facilitating ease of fixing of the test specimen.

• The control Panel consists of a power pack complete with drive motor and an oil tank, control valves and electronic display unit.

• The power pack generates a pressure of upto 600 kgf/cm the hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth.

• Hand-operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable incorporated in the hydraulic system is a regulating valve which maintains a practically constant rate of piston movement. Control by this valve allows extensometer readings to be taken.

Product Price :Get Latest Price

• A base with a vertical shaft and two horizontal arms.
• The lower arm is adjustable for height.
• 1 No.. Initial Needle 1/12 inch dia 1/4 lb.wt.
• 1 No.. Final Needle 1/12 inch dia. 1lb.wt. 1 No. Glass base plate.

Additional Information:

• Item Code: STC-05
• Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
• Delivery Time: 5-8 days
• Packaging Details: wooden boxes are used

Product Price :Get Latest Price

This tester was ergonomically designed to provide a compact, low-cost, functional unit which is quick and easy to operate. It gives extremely high accuracy and yet is robust enough for routine quality control testing. The single and twin column designs permit all-round access to the specimen and grips. Universal Tester, screw type, motor driven and is suitable for conducting tensile strength & elongation, compression, bend, shear tests on various materials such as metal rubber, plastic, leather, asbestos, PVC, paper, textile, Wire/Cable, plywood/wood, ceramics, rexins etc. in conformity with standards like ISS, BSS, ASTM, DIN or ISO. We are exporting a wide range of testing machine, electro mechanical testing machine, electric testing machine, universal mechanical testing machine and more. The basic frame allows a total jaw separation of 1000 mm. However, extended frame having jaw separation upto 2000 mm may be supplied at additional cost. The machine is operated on 230 volts. 1-ph, 50 c/s. A. C. Mains or as desired. A comprehensive range of grips, attachments/fixtures, cutting dies are available to suit the testing needs of many different industries.

Specifications:

• Capacity: 50 to 10000 Kgf or equivalent KN
• Type aviable : Bench top, single or dual screw
• Testing Area: Tension and Compression above moving cross-head
• Horizontal Clearance: 12 inches (300mm) to 16inches (400mm)
• Vertical Clearance: 36 in. (914mm) STANDARD, excluding grips or fixtures
• Cross-head Travel: 24 in. (610mm) STANDARD or greater

• Cross-head Guidance independent chrome plated guide rods
• Upper Cross-head adjustable CROSSHEAD CONTROLS
• Cross-head Speed Selection: 0.1% increments of speed range
• Digital Speed Display: English or Metric units

• Load Weighing Accuracy: +/- 0.1% of indicated load +/- 0.1% of range in use
• Ranges: 10%, 20%, 50%, 100% of load cell in use
• Automatic Overload Protection: STANDARD
• Peak Load Recall: STANDARD
• Digital Display: STANDARD - English or Metric units
• Up to five load cells can be used
• Automatic break detect: STANDARD

• Displacement Measuring system and zero return (Optional)
• High Precision Optical incremental encoder
• Range full cross-head travel
• Zero return push-button actuated return to zero position

• A wide variety of options is available for use with these systems, including chambers, extensometers, grips, recorders, etc.

Product Price :Get Latest Price

APPLICATION SYSTEM:

• Peak Load along with on line load
• Maximum elongation with online elongation
• Ultimate Tensile Strength
• Graphical Display of load vs. time
• Graphical Display of elongation vs. time
• Graphic Display of load vs. elongation
• Graphic Display of stress vs. strain
• Complete Statistical Analysis
• Data report management

  
SAFETY FEATURES:

• Machine stops after specimen failure
• Safety against over travel of piston
• Surge protector
• Auto machine diagnosis
• Safety against overloa

Additional Information:

• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: wooden boxes are used.

Product Price :Get Latest Price

The Superb Tech Computerized Universal Tensile Tester is the cumulation of years of experience by one of the world’s leading manufacturers of materials testing machines, tensile testing machine and mechanical testing machine. This new tester is designed for a wide range of applications including: bending, compression, tensile testing and peeling using appropriate test attachments which are optional. The tester offers excellent accuracy and ease of use. It is strong and durable enough to withstand many years of use, yet it has a compact load frame that provides greater flexibility of placement. Whether you choose the basic unit or add the optional advanced software package, the tester sets the standard in Universal Tensile Testing. The load cell used in this tester offer one-touch zero adjustment and load cell capacity discrimination guarantees accuracy and speeds the setup process. This is particularly important when multiple tests are being performed.

Software Package:

• Strong load frame
• Displays all operational data - The Control Panel displays all Crosshead traveling Values in relation to actual load value vs elongation.
• Memory function - Test data may be displayed, stored in memory for future reference or printed for reports, certification and presentations.
• Simple operation - Test parameters are easily set through simple key & point & click Entry with the mouse.

• Max. capacity - available from 10 Kgf to 10,000 Kgf.
• Test Width (mm) approx. - 500mm
• Crosshead Travel (mm) approx. - 1000mm
• Effective Stroke (mm) approx. - 1000mm
• Crosshead Speed (mm/min) - upto to 500 mm/min

• The latest computer hardware including an Ink Jet Printer and a 15” Colour Monitor.

• The following are a list of test categories that can be performed on the tester:
• Tensile
• Tearing
• Creep
• Compression
• Adhesion
• Humid environmental
• Bending
• Sticking
• High-low temperature
• Pull-out
• Environmental
• Peeling
• Stress-relaxation

Product Price :Get Latest Price

SALIENT FEATURE:

• Loading accuracy: As high as + 1 %
• Speeds: Straining at variable speeds to suit wide range of materials
• Facilities for tests: Motor-driven threaded columns for
  quick and convenient
  adjustment of lower crosshead to facilitate rapid fixing of test specimen.
• Autographic recorder: Simultaneous roll autographic recorder
  supplied as standard
  to enable study of the behaviors of materials.
• Ideal Dia: High reading accuracy due to large size ideal design of dial.
• Large columns: Large effective clearance between columns
  enables testing of standard
  specimen as well as structures.
• Easy changeability: Easy change from plain to threaded and
  screwed specimens
• Simple & Safe: Simple to operate.
• Robust construction
• Chrome planted metal components
• Wide range of standard and special attachments
• accessories available.

Additional Information:

• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: wooden boxes are used.