Soil Testing Lab Equipments

Approx. Rs 30,000 / PieceGet Latest Price

This apparatus is used for measuring pore water pressure and pore air pressure in soils. This is as per the principal outlined in the book “Measurement of soil properties in triaxial tests” by A.W. Bishop and D.J. Henkel. This is used as an accessory for triaxial test apparatus.

Specifications:

• The apparatus consists of a panel for wall mounting on which are fitted -1.0 to 10

Manometer:

• Glass U-tube manmeter for measuring low positive pore pressures negative pore pressures and checking zero error of pressure gauge. It is provided with a mercury trap (Mercury supplied at extra cost. Null indicator made out of clear transparent Perspex with mercury trap and cursor to indicate the mercury level.)

Burette:

• 50ml Burette for measuring the volume change in the soil specimen. Pressure pump fitted with four sleeve packed valves, Operated by means of a hand wheel on the end of the piston rod which is threaded through the pump cap and gives a smooth, fine adjustment of pressure. Copper coil and water reservoir. The unit is tested against leaks upto 10kg/cm sq.

Additional Information:

• Item Code: SMA-40
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Approx. Rs 3,000 / PieceGet Latest Price

• It consists of a brass cup held on an adjustable bracket. The cup can be adjusted for a fall of 1cm and cam be raised and dropped on a rubber base of standard hardness by cam action. Complete with one casagrande grooving tool, one Grooving tool and a heigh gauge block.

Additional Information:

• Item Code: SMA-19
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Approx. Rs 15,500 / PieceGet Latest Price

Additional Information:

• Packaging Details: CUSTOMIZE

Approx. Rs 75,000 / PieceGet Latest Price

• Mechanical screw loading jack, 10,000kg. capacity with U-bracket and swivel head. Penetration piston, 50mm dia.threaded at eh upper end. Extension rods consisting of 2 lengths 5cm. 2 lengths 10cm., 1 length 30cm., 1 length 50cm., 1 length 10cm., used as spacers between the proving ring and penetration piston. The lengths are machined from steel tubing Connector set, has eight connectors for coupling the penetration piston a nd proving ring assembly either directly or through extension pieces. Dial gauge support of seamless pipe construction. It stands 30cm hig and 45cm wide at eh base. Provided with a quick release screw type-clamp capable of sliding and locking anywhere along 2 meter length of the bridge. Supplied with annular metal weight 5kg., 250mm dia. with 53mm dia. central hole, slotted metal weight 5kg., 215mm to 250mm dia. with 53mm dia. slot, 2Nos. Slotted metal weights, 10kg, 25mm to 250mm dia. with 53dia slot 2Nos.

• Dial gauge 0.01mm x 25mm. High sensitivity Proving Ring 5000kg capacity with calibration chart and carrying case.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Approx. Rs 57,000 / PieceGet Latest Price

The Soil Testing Equipments is offered to the esteemed customers at highly competitive prices. These products are manufactured using high-grade components that are procured from some of the most trusted vendors of the industry. In addition to this, we make sure that the ordered products are timely delivered at the clients'''''''' premises in perfect packaging.

Other Products Details:

• Apparatus for soil determination (core cutter with dolly & rammer)
• Core cutter with dolly (without rammer)
• Cone penetrometer, as per is 2720 (part v) hand operated
• Compaction app. proctor, as per is 10074
• Mold 100 mm dia, 1000 cc volume, steel, with base
• Plate & collar
• Rammer 2. 6 kg x 310 mm controlled fall
• Mould, 1 50 mm dia., 2250 cc volume, steel, with base plate & collar
• California bearing ratio test app.
• Direct shear app, hand operated, as per is:
• 2720 (part xviii), without proving ring & dial gauge
• Proving ring for above, 2 kn (with our calibration)
• Dial gauge for above, 0. 01 x 25 mm
• Field density app., 15 cm
• Grain size analysis app. , pipette method, as per is:2720 (part iv)
• Infra-red moisture balance, 25 grams for soil
• Liquid limit device, motorized, 1 20 rpm
• Mechanically planetary mixer for soil
• Pocket penetrometer
• Proctor needle spring type
• 3 permeability app. as per IS: 2720 (part xvii)-l 966, with g. M. Mould
• Overhead tank for above made of gi sheet
• Plate bearing test app.
• Plastic limit app.
• Rapid moisture meter, 0-25 % or 0-50 %
• Sieve shaker gyratory, motorized, with timer 0 adapter for 30 cm dia. sieves, aluminum
• Shrinkage limit app., as per IS: 2720 (part vi) without mercury
• Unconfined compression test app.

Additional Information:

• Packaging Details: customize

Approx. Rs 60,000 / PieceGet Latest Price

Additional Information:

• Item Code: marshal
• Delivery Time: 7-8 days
• Packaging Details: wooden

Approx. Rs 11,500 / PieceGet Latest Price

• Casagrande grooving tool. ASTM Grooving tool, Height block, 1cm high.

Additional Information:

• Item Code: SMA-20
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Approx. Rs 16,000 / PieceGet Latest Price

• Hydrometer for other liquids also a available.

• 2720 (PART-IV) & 3104.

Additional Information:

• Item Code: SMA-23
• Packaging Details: CUSTOMIZE

Approx. Rs 4,500 / PieceGet Latest Price

• It consists of a light weight barrel assembly with a polished and ground steel loading piston plunger. A direct reading scale is engraved on the piston barrel and indicates load in kg./sq/cm/ A maximum load indicator ring is provided on the penetration plunger. The calibrated spring is heat treated and plated for rust resistance. The barrel diameter is 20mm and the length 150mm. Supplied in storage box.

Additional Information:

• Item Code: SMA-30
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Approx. Rs 77,000 / PieceGet Latest Price

Loading Unit:

• Supplied with load yoke with direct and lever system for applying load. Normal stress capacity 8kg/sq.cm. Load is applied either directly of through a counter balanced detachable lever. Provision is made for load to be applied either through a steel ball recessed in the loading pad or direct through a boss on the pre calibrated loading yoke. The loading unit is provided with V strips and roller strips for frictionless movement of shear box housing.

Shear Box Assembly:

• Comprising Direct Shear box in two halves for a square specimen size 60 x 60 x 25 mm one pair of plain gripper plates, one pair or perforated gripper plates, one pair or porous stones, one top loading pad. Shear box housing: Accommodates the Direct Shear Box assembly. Complete with two ball roller strips. 
• Specimen Cutter: For cutting 60 x 60 x 25 mm specimen from larger samples. Set of weights to give a normal stress of 3 kg/sq.cm. through lever as follows:

Complete set as above but without proving ring. Nett weight 140Kg.

Essential Accessories:

• High sensitivity compression ring cap 200 kg one consolidation dial gauge 0.01 mm x 25 mm and one strain dial gauge 0.01 mm x 25 mm and one strain dial gauge 0.01 mm x 25 mm.

Optional extras:

• Additional set of weights to give a normal stress of 5 kg/cm2 Soil Sampler for 60 mm x 60mm specimen and test from pad of 50. Spares: Porous stone for 60 mm x 60 mm size sample avaiLable in pairs.

As Per IS:

• 2720 (Part-VIII), ASTM D-3080 For determination of the direct shear strength of soils.

Additional Information:

• Item Code: SMA-35
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Approx. Rs 22,800 / PieceGet Latest Price

For trimming various diameter specimen for triaxial and unconfined compression tests.

Specifications:

• The lower specimen grip is mounted on a disc which rotates freely. The soil sample is mounted on the lower specimen grip and the upper grip is firmly seated on top of the specimen. The vertical guide can be adjusted to control the depth of cut. While trimming the lower disc is rotated by hand. Supplied complete with a wire saw, trimming knife, pairs of gripper plates for 38mm dia, 50mm dia, 75mm dia & 100mm dia specimen.

Additional Information:

• Item Code: SMA-39
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Approx. Rs 7,500 / PieceGet Latest Price

• length 1m..Fifteen.
• Load measuring head with automatic cut-off valve and oil can one set.
• Pressure Gauge 0-160 kg/cm.sq...one
• Pressure Gauge 0-160 kg/cm.sq...one
• Auger with bolt...Four
• Auger driving handle...Four
• T-rod...One
• Spanner...One

Spares & Accessories:

• Steel cone, 60 degree, 10sq.cm. base area. Mantle tube 36mm uniform O,D working length 1 meter with sounding rod. Mantle tube 36mmO.D at the ends and reduced dia. in between with sounding rod. Working length 1 meter. Pressure gauge 6 inch dia. 0-10kg/cm.sq. in 0.1 kg/cm.sq. divisions. Sampler to go with the above equipment. Friction jacket for Friction Ratio.

As Per IS:

• 4968- (Part-III)

Note: 

• Uniform diameter mantle tubes can be ordered at extra cost. Optional Extras: Mantle tube 36mm uniform O.D. with sounding rod, working length 1mtr.

Additional Information:

• Item Code: SMA-44
• Delivery Time: 2-3 WEEK
• Packaging Details: CUSTOMIZE

Approx. Rs 98,000 / PieceGet Latest Price

• Supplied with load yoke with direct and lever system for applying load. Normal stress capacity 8kg/sq.cm. Load is applied either directly of through a counter balanced detachable lever. Provision is made for load to be applied either through a steel ball recessed in the loading pad or direct through a boss on the pre calibrated loading yoke. The loading unit is provided with V strips and roller strips for frictionless movement of shear box housing.

Shear Box Assembly:

• Comprising Direct Shear box in two halves for a square specimen size 60 x 60 x 25 mm one pair of plain gripper plates, one pair or perforated gripper plates, one pair or porous stones, one top loading pad. Shear box housing: Accommodates the Direct Shear Box assembly. Complete with two ball roller strips.
• The unit is electrically operated to give the following 12 rates or strains. 1.25, 0.625, 0.25, 0.125, 0.05, 0.025, 0.01, 0.005, 0.002, 0.001, 0.0004 and 0.0002mm/min. The unit is connected with Mechanical Gear box for step response Speed The apparatus is suitable for operation on 230 volts single phase A.C. Supply.

As Per IS: 2720 (Part-VIII), ASTM D-3080 For determination of the direct shear strength of soils>

Approx. Rs 22,000 / PieceGet Latest Price

Additional Information:

• Item Code: SMA-24

Approx. Rs 9,700 / PieceGet Latest Price

The instrument is for detecting saturation percentage of water in soil. It is workable on 9 V Battery 3.5 Digit display. Complete with 20 cm electrode and wooden box.

Approx. Rs 43,000 / PieceGet Latest Price

The Soil Testing Equipments is offered to the esteemed customers at highly competitive prices. These products are manufactured using high-grade components that are procured from some of the most trusted vendors of the industry. In addition to this, we make sure that the ordered products are timely delivered at the clients' premises in perfect packaging.

Other Products Details:

• Apparatus for soil determination (core cutter with dolly & rammer)
• Core cutter with dolly (without rammer)
• Cone penetrometer, as per is 2720 (part v) hand operated
• Compaction app. proctor, as per is 10074
• Mold 100 mm dia, 1000 cc volume, steel, with base
• Plate & collar
• Rammer 2. 6 kg x 310 mm controlled fall
• Mould, 1 50 mm dia., 2250 cc volume, steel, with base plate & collar
• California bearing ratio test app.
• Direct shear app, hand operated, as per is: 2720 (part xviii), without proving ring & dial gauge
• Proving ring for above, 2 kn (with our calibration)
• Dial gauge for above, 0. 01 x 25 mm
• Field density app., 15 cm
• Grain size analysis app. , pipette method, as per is: 2720 (part iv)
• Infra-red moisture balance, 25 grams for soil
• Liquid limit device, motorized, 1 20 rpm
• Mechanically planetary mixer for soil
• Pocket penetrometer
• Proctor needle spring type
• 3 permeability app. as per IS: 2720 (part xvii)-l 966, with g. M. Mould
• Overhead tank for above made of gi sheet
• Plate bearing test app.
• Plastic limit app.
• Sieve shaker gyratory, motorized, with timer 0 adapter for 30 cm dia. sieves, aluminum
• Shrinkage limit app., as per IS: 2720 (part vi) without mercury.

Approx. Rs 3,600 / PieceGet Latest Price

• The apparatus consists one each of Compaction Mould Gun Metal, 100mm I.D. x 127.3mm height x 1000 c. volume, complete with collar and base plate. Rammer 2.6kg x 310 mm controlled fall.

Additional Information:

• Item Code: STANDARDCOMPACTIONTEST
• Packaging Details: CUSTOMIZE

Approx. Rs 45,000 / PieceGet Latest Price

The apparatus is used for the Laboratory determination of permeability of soils using a constant or a variable -3 7 head.This test is recommended for soils with co-efficient of permeability in the range of 10 to 10- cm/sec. The maximum particle size of the oil whichcan be tested in the mould is 10mm.

Specifications:

• The equipment comprises one each: metal mould, Metal mould extension collar, Metal Drainage base plate with a recess for a porous stone and with an outlet valve. Metal clamping ring. Metal drainage cap (top plate with a recess for a porous stone and fitted with an inlet valve and an air release valve). Metal dummy plate to serve as a false bottom during compaction. Porous stone for drainage cap. Porous stone for base plate. Each glass tube is longer than 1 meter and has a secreted end at the bottom. To read water head 2 Nos. meter scales are fixed between the tubes. A length of 3 meter long rubber tubing with pinch cock is also supplied.

As Per IS: 2720 (PART XBII)-1966.

Additional Information:

• Packaging Details: WOODEN BOX

Approx. Rs 42,000 / PieceGet Latest Price

Approx. Rs 45,000 / PieceGet Latest Price

Additional Information:

• Packaging Details: WOODEN BOX

Approx. Rs 1,900 / PieceGet Latest Price

Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just to crumble when rolled into a thread of 3mm. dia.

Specifications: 
The complete set consists of one each: 

• Glass plate 20cm x 115cm having ground ends and one side frosted., 
• Brass of stainless steel rod 3mm dia. x 150mm long., 
• Flexible spatula., 
• Set of 6 moisture containers.
• Porcelain basin 150mm dia.
• Plastic wash bottle 500ml.

• 2720 (PART-VII) ASTM D 427, BS:1377 AASHO 190.

Additional Information:

• Item Code: SMA-15
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Approx. Rs 17,000 / PieceGet Latest Price

This is for the determination of their sub sieves particle distribution in a soil sample by mechanical analysis. An analysis of this kind expresses quantitatively the proportions by weight of the various size of particles present in the soil. It is recommended as a standard procedure to use dispersion agent to avoid flocculation.

Specifications:

• The apparatus consists of a sliding panel which moves up and down by means of a screw allowing Anderson pipette fixed to it tube raised or lowered vertically. A sedimentation tube is held by a Laboratory clamp provided on the stand below the pipette. The depth of immersion is measured by a scale graduated in mm at the side of the sliding panel. Supplied complete with Anderson pipette 10ml. at eh side capacity made from glass, and a sedimentation tube also of glass of 500ml capacity and 50 Nos Test forms.

• Sedimentation pipette (Anderson pipette) 25ml.
• Sedimentation tube 1000ml.
• Sedimentation pipette 10ml.
• Sedimentation tube 500 ml.
• Test forms pad of 50.

• 2720 (Part-IV) & BS: 1377.

Additional Information:

• Item Code: SMA-21
• Packaging Details: CUSTOMIZE

Approx. Rs 6,000 / PieceGet Latest Price

Additional Information:

• Item Code: SMA-22
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Approx. Rs 2,600 / PieceGet Latest Price

• The complete apparatus consists one each of: Small Sand Pouring cylinder, 3 liter capacity, fitted with conical funnel and shutter. Cylinder calibrating container, internal dia. 10 cm and internal depth 15cm, fitted with a flange, Metal tray, 31cm. square and 4 cm deep with a 10cm dia. hole in the centre.

• Metal tray, 30cm square and 4cm deep without hole. Test forms pad of 50. Note: Sand poring cylinder large as per IS 2720 (P-XXVII) also avaiLable.

• 2720 (PART-XXVIII)

Additional Information:

• Item Code: SMA-25

Approx. Rs 88,000 / UnitGet Latest Price

• It is a motor driven mechanical compactor useful for soil compaction into 100mm or 150mm diameter moulds. Two sets of rammers are provided, one of 2.6 and arranged for 310mm. drop and other 4.9kg and arranged for 450mm fall. For compaction soil into 150mm dia. moulds, 100mm face dia. rammers having weight .6kg and 4.89 kg are used. Where as for 100 mm dia. moulds they are of 50mm dia. The rammer assembly is provided with a ratchet and pawl arrangement to lift it from the top of the soil layer. When the rammer reaches the required height the pawl release the rammer which falls freely in soil surface. The release mechanism is operated by an arm moving up and down which is connected to a reduction gear coupled to the motor through another arm. An automatic blow counter fitted to the compactor is used to set the number of blows. The base plate of the specimen mould is to fitted to the rotating base plate of the th instrument which make 1/5 revolution per stroke. The equipment.

• 2720 (Part VII & VIII).

Additional Information:

• Item Code: SMA-28
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Production Capacity: 100 units

Approx. Rs 22,000 / PieceGet Latest Price

• Porcelain evaporating Dish.
• Shrinkage Dish.
• Glass Sup.
• Perspex Plate with three metal prongs. 
• Perspex plate.
• Flexible spatula.
• Glass cylinder 25ml x 0.5ml, supplied without mercury. Optional

• Mercury supplied in bottle of 500 gms lied in bottle of 500 gms.

• 2720 (PART-VII) ASTM D 427, BS:1377 AASHO 92.

Additional Information:

• Item Code: SMA-16
• Packaging Details: PLASTIC CASE

Approx. Rs 30,000 / PieceGet Latest Price

Proving Rings are used for load measurements and are used in the outfits of a number of Soil/Cement & Bitumen Testing Equipments like Direct Shear Test Apparatus, Triaxial Shear Test Apparatus, C.B.R. Test, Unconfined Test, Marshall Test etc. They are made out of special steel carefully forged to give maximum strength and machined to give highest sensitivity combined with stability to ensure long life and accuracy. When compressive of tensile load is applied within the elastic range, the proving rings get temporarily deformed. This deformation is measured by a sensitive dial gauge fixed co-axially at The center of the proving ring. The dial gauge readings thus obtained versus load applied enable the operator to find out unknown load, just by noting the dial gauge reading for the unknown load. The proving Rings have high elasticity and on removing load they regain their original shape provided they are loaded in their elastic limits. A dial gauge and plunger anvil are mounted on brackets clamped to the ring body. The dial gauge is held perfectly rigid without the remote chance of shifting due to inadvertent shocks or pressure exerted on it. The dial gauge plunger rests on an adjustable anvil. Proving Rings, from 50kg to 1,00,000kg capacity provided ½ inch B.S.F. female threads Loading bosses and a loading ball nipple and steel ball are supplied with each ring. Rings of capacity over 25000kg (or 25 Tonnes) are not thus threaded. Each ring is individually calibrated and supplied with works calibration chart and a carrying case. Calibration Charts from Standard Laboratories for the Proving Rings ordered are also avaiLable at extra cost. All Proving Rings are Integral Type. Integral type compressive Proving Rings of different capacities from 50kgf to 200000 kgf are avaiLable.

• Above cap. 50 to 500kgf
• Above cap. 500 to 3000kgf
• Above cap. 3000 to 5000kgf
• Above cap. 5000 to 10000kgf
• Above cap. 10000 to 20000kgf
• Above cap. 20000 to 30000kgf
• Above cap. 30000 to 50000kgf
• Above cap. 50 000 to 100000kgf  
• Above cap. 100000 to 200000kgf
• Above cap. 200000 to 300000kgf

Additional Information:

• Packaging Details: CUSTOMIZE

Approx. Rs 18,400 / PieceGet Latest Price

Approx. Rs 42,000 / PieceGet Latest Price

Remoulded Compacted soil, when soaked in water, absorbs and swells. Swell Test Apparatus is designed to determine the swelling pressure developed by soil specimens molded to desired densities at known moisture contents.

Specifications:

• The outfit comprises the following: One loading unit, hand operated 5 tons capacity with two rates of travel. One high sensitivity Proving Ring 250kg. capacity with calibration chart and carrying case. One Dial gauge 0.01mm x 25mm. One Gun metal mould 1000ml. capacity. (100mm dia. x 127/3mm high) with collar and base plate and pair of porous stones 100mm dia. x 12.7mm thick. One Gun metal/brass perforated swell plate 100mm dia x 16mm thick. One spacer 100mm dia. x 12.7mm thick; one load transfer bar and one steel ball. One soaking tank 250mm dia x 210mm high.

Additional Information:

• Item Code: SMA-48

Approx. Rs 3,500 / PieceGet Latest Price

Test Sieves is a common Laboratory requirement. Sieves are used for sieving of chemical powders, medical powders, aggregate, sand soil and cement etc. These sieves are manufactured as per various standards like ISS, BSS, ASTM, DIN etc. In Civil Engineering it is a common practice to use sieves for gradation and particle size determination. Manufacturers brass frame and G. I. Frames Sieves of dia. 200mm, 300mm and 450mm. Normally brass sieves are manufactured in 200cm dia. and frame is spun brass, The Sieve cloth used is standard SS or phosper bronze wire mush. The G.I. Frames sieves manufactured normally sizes 300mm dia. or 450mm dia. have a steel perforated sheet having accurately punched square holes.

Additional Information:

• Item Code: SMA-47
• Packaging Details: CUSTOMIZE

Approx. Rs 99,000 / PieceGet Latest Price

It consists of a cabinet which houses the electrical motor, reduction gear and the turret gear box. The loading is done by the upward movement of the lower platen of approx. 198mm dia. which is firmly fixed to the lead screw. When the lever is set in the neutral position, it isolates the lead screw from the rest of the drive mechanism and the lead screw can be manually moved up or down by operating the handle. The various rates of strain that can be obtained are as follows.

Other Details:

On the unit are fixed mains switch , a jewel lamp and a forward reverse switch. A relay is fitted inside the cabinet so that in case of a power failure the unit will not restart on its own on resumption of power, unless the switches are operated. The adjustable cross head can be set at any required height over the two pillars and secured in position by tightening the nuts. It carries a hexagonal proving ring adaptor. A bracket for strain dial gauge (dial) gauge to be ordered extra) is attached to one of the pillars of the load frame. The base with the two pillars and adjustable cross head is detachable and the whole upper portion above the level of the top plate of the cabinet can be fixed in its proper positon with the help of the clamping screws.

Approx. Rs 3.1 Lakh / PIECEGet Latest Price

Additional Information:

• Packaging Details: WOODEN BOX

Approx. Rs 18,000 / PieceGet Latest Price

A.              For testing upto 120Aº C           

B.                 For testing upto 300Aº C   

Vicat softening temperature of plastics is the temperature at which a standard flat-ended indentor penetrates one millimetre into the surface of the material under test under a specified load. The test is conducted by placing a test specimen taken from the sample under test on a flat platform inside a liquid bath and applying compression load over its upper face through a flat-ended indentor. The load is applied by placing dead weights on the upper end of the indentor. After the test specimen attains the temperature of the bath, the bath temperature is increased gradually till the indentor penetrates by exactly 1 mm into the test specimen. The bath temperature in degrees centigrade at which this happens is reported as the Vicat Softening Temperature of the sample under test.

Approx. Rs 54,500 / PIECEGet Latest Price

Approx. Rs 1 Lakh / PieceGet Latest Price

Weatherometer Xeno Test offered meets the demands of simulating damaging effects of long term outdoor exposure of materials and coatings. Some of its features include:

• Support exposing test samples to varying conditions of weathering like light, moisture, and heat
• Uses xenon arc light source for providing radiation spectrum that simulates natural sunlight
• Glass filters around xenon arc for modifying light spectrum to simulate appropriate end use conditions
• Moisture provided by humidifier and direct spray
• Microprocessors for monitoring and precisely controlling radiation applied to test samples

Additional Information:

• Item Code: WEATHERMETER
• Delivery Time: 2-3 WEEK
• Packaging Details: WOODEN PACKING

Approx. Rs 5,200 / PieceGet Latest Price

SAMPLING AUGERS

Augers are used to collect disturbed soil samples at reasonal depths Laboratory tests. Augers are avaiLable in two types and each in different sizes. Blade type (post hole type) and Helical type (Screw type). Each auger outfit consists one each of Auger head, one meter long rod, Tee piece and hangle. Depths of excavating can be increased by using- additional extension rods.

(a)75 mm, (b) 100mm & (c) 150 mm dia.

Additional Information:

• Production Capacity: 100 units/month
• Delivery Time: 10-15days
• Packaging Details: WOODEN BOXES ARE USED.

Approx. Rs 850 / PieceGet Latest Price

We are offering Pycnometer Bottle to our clients. Useful to determine specific gravity of clays, sand and gravel of size smaller than 10mm.

Additional Information:

• Item Code: SMA-33

Approx. Rs 85,000 / PieceGet Latest Price

Additional Information:

• Delivery Time: 2-3 WEEK
• Packaging Details: WOODEN PACKING

Approx. Rs 45,700 / PieceGet Latest Price

Consolidation test is unidimensional test considered extremely important in soil mechanics. Sample taken from adjacent areas of a single site show different settlement even when tested using same techniques. Soil of similar strength may show varying consolidation. Samples are very carefully prepared and vertical settlement of the specimen in saturated or drained conditions carefully recorded when known load is applied.

• The standard outfit comprises of the following items. Loading unit, maximum capacity 20 kg/cm sq. having a loading yoke connected to a lever arm with a counter balancing adjustment and having a lever ration of 1:1, the whole assembly being mounted on a sturdy steel frame stand. The loading unit is so designed that it can be used for consolidation cells of different diameters as well as different dia floating ring type consolidation cells. Fixed ring type consolidometer (Odeometer) cell assembly for testing 60mm dia. x 20mm thick specimen comprising: Fixed ring for specimens 60mm x dia. 20mm. thick with guide ring. Top and Bottom Porous stones for 60mm dia. specimens. Perforated Pressure pad, Channelled base with water inlet and Gasket. Flanged Water Jacket, water reservoir with plastic tube and pinch cock. Set of weights to give a pressure of 10kg/cm.sq. on 60mm dia. specimen, comprising: 7nos. 0.05 kg/sq.cm., 5Nos. 0.1 kg/sq.cm., 6Nos. 0.2kg/sq.cm. and 5 Nos. 1.0kg/sq.cm. Supplied complete as above but without dial gauge. Accessories: Dial Gauge 0.002mm x 10mm. Extension piece, 40 mm long. Test forms pad of 50 for Consolidation Test Plot” Test forms pad of 50 for one Dimensional Consolidation. 
• Optical Extras: Varying head stand pipe, 50cms. Long with mm. scale. Fixed ring type of consolidometer (Odeometer) cell assembly for 50mm dia. x 20 mm thick specimens complete with fixed ring guide ring, pair or porous stones, perforated pressure pad, channeled base, gasket and flanged water jacket. Set of weights to give a pressure of 10kg/sq.cm., on 50 cm. dia specimens. Fixed ring type of consolidometer (Odeometer) cell assembly for 70mm dia. x 20 mm thick specimens complete with accessories as above. Set of weights to give a pressure of 10kg/sq.cm on 70mm. dia. specimen. Fixed ring type of consolidometer (Odeometer) cell assembly for 100 mm dia. x 25 mm thick specimens complete with accessories as above. Set of weights to give a pressure of 10kg/sq.cm.on 100 mm dia. specimens.

• 2720 (Part-XV), BS 1377. ASDTM D-2435

Additional Information:

• Item Code: SMA-34

Approx. Rs 96,000 / PieceGet Latest Price

• The equipment consists one each of: Vibratory table with a cushioned steel vibrating deck about 75 cm x 75 cm. It has a frequency of approximately 3600 vibrations per minute under a 115 kg load. Amplitude is variable in between 0.65mm in steps of 0.05 to 0.25mm, 0.25 to 0.5mm and 0.45 to 0.65mm. Suitable for operation on 415 volts, three phase supply. Cylindrical metal unit with mould, 3000 ml capacity. Guide Sleeve with clamp assembly. Surcharge base plate for mould. Handle for surcharge base plage. Surcharge weight. The total weight together with surcharge base plate and handle is equivalent to 140kg./sq.cm. for mould. Cylindrical metal unit weight mould 15000ml capacity. Surcharge base plate for guide sleeve. Surcharge weight for cylindrical mould of 15000 ml. cap. (Total weight together with the above mould 8 surcharge weight is equivalent to 140 kg./sq.cm.) Dial gauge holder & calibration bar 75 c 300mm x 3mm.

• Dial gauge 0.01mm x 50mm travel. Extension piece 25mm for dial gauge.

• 2720 XIV

Additional Information:

• Item Code: SMA-29