Send Email
Send SMS
Search
Superb Technologies


Fluid Mechanics Lab Equipment

Our product range includes a wide range of fluid mechanics lab apparatus, bernoullis theorem apparatus, flow through orifice mouthpiece apparatus, discharge over notches apparatus, impact of jet on vanes and impact of jet on vanes with data logging facility.

Fluid Mechanics Lab Apparatus

REQUEST CALLBACK

Fluid Mechanics Lab Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 55,000 / machineGet Latest Price

Product Details:
Voltage250 V
Power SourceElectric
Motor Power0.5 HP
PhaseSingle Phase
Frequency50-60 Hz

Offered by us is a wide range of high quality Fluid Mechanics Lab Apparatus to the esteemed customers. These lab apparatus are manufactured in compliance with the international quality standards, by our team of experts. In addition to this, we check Fluid Mechanics Lab Apparatus on certain well-defined parameters to gauge its flawless nature.

Other Details:

  • Study of Pipe Fittings
  • Orifice & Mouthpiece Apparatus
  • Bernoulli's Theorem Apparatus
  • Friction in Pipe Lines Apparatus
  • Notch Apparatus
  • Metacentric Height Apparatus
  • Impact of jet on Vanes Apparatus
  • Nozzle Meter Apparatus
  • Pipes in Parallel
  • Hydraulic Bench with Accessories
  • Reynolds Apparatus
  • Pitot Static Tube Apparatus
  • Helical Coil Apparatus
  • Equivalent length of pipes
  • Pipes in series
  • Venturi meter, Orifice meter & Rotameter Apparatus
Yes! I am interested

Bernoullis Theorem Apparatus

REQUEST CALLBACK

Bernoullis Theorem Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 22,000 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Power SourceElectric
Inlet Tank Capacity20 Ltrs
PhaseSingle Phase
Power0.5 kW
Sump Tank Capacity70 Ltrs
Voltage220V AC
Floor Area1.5 x 0.75 m

The equipment is designed and fabricated to demonstrate the Bernoulli's theorem. It consists of a test section made of acrylic. It has convergent and divergent sections. Pressure tapings are provided at different locations in convergent and divergent section. Present set-up is self-contained water re-circulating unit, provided with a sump tank, centrifugal pump etc. An arrangement is done to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stopwatch.

Experimentation:

  • To verify Bernoulli's Theorem experimentally
  • To plot the Total energy Vs distance
  • Utility required
  • Water Supply
  • Drain


Technical Details:

  • Test Section: Material Acrylic (One Piece).
  • Piezometer Tubes: Material P.U. Tubes (7 Nos.)
  • Water Circulation: FHP Pump, Crompton make.
  • Flow Measurement: Using Measuring Tank with Piezometer, Capacity 25 Ltrs.
  • Stop Watch: Electronic.
  • Tanks will be made of Stainless Steel.
  • Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus
  • The whole set-up is well designed and arranged in a good quality painted structure


Control Panel
:

  • Standard make On/Off Switch, Mains Indicator, etc.


Additional Information:

  • Item Code: SHD-01
  • Delivery Time: 5-8 days
  • Packaging Details: wooden boxes will be used if required
Yes! I am interested

Flow Through Orifice Mouthpiece Apparatus

REQUEST CALLBACK

Flow Through Orifice Mouthpiece Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 24,000 / PieceGet Latest Price

Product Details:
Power SourceElectric
Floor Area1.5 x 0.75 m
Sump Tank Capacity70 Ltrs
PhaseSingle Phase
Power0.5 kW
Voltage220V AC

It consists of a tank provided with inlet supply diffuser, overflow. Provision for fitting Orifice or Mouthpiece at the outlet of tank. An arrangement is done to vary head and keep it constant at desired level. A pointer gauge arrangement for measuring X-Y co-ordinates of Jet is also fitted. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow rate of water is measured with the help of measuring tank and stop watch.

Experimentation:
  • To determine the co-efficient of discharge of different Orifice and mouthpieces
  • To determine the co-efficient of velocity

Utility Required:

  • Water Supply
  • Drain

Technical Details:
  • Set of Orifices: Material Acrylic (2 Nos.)
  • Dia. 10mm and 15 mm
  • Set of Mouthpieces: Material Acrylic (3 Nos.)
  • Dia 10 mm (L/D = 1)
  • Dia 10 mm (L/D = 2.5)
  • Dia 10 mm (L/D = 4)
  • Constant Head tank: 35 Ltrs
  • Pointer Gauge: To measure X-Y co-ordinates of Jet
  • Water Circulation: FHP Pump, Crompton make
  • Flow Measurement: Using Measuring Tank with Piezometer, Capacity 25 Ltrs
  • Stop Watch: Electronic

Control Panel Comprises of:
  • Standard make On/Off Switch, Mains Indicator, etc
  • Instruction Manual: An ENGLISH instruction manual will be provided along
  • with the Apparatus Tanks will be made of Stainless Steel
  • The whole set-up is well designed and arranged in a good quality painted structure.


Additional Information:

  • Item Code: SHD-02
  • Delivery Time: 5-8 days
  • Packaging Details: wooden boxes are used if required.
Yes! I am interested

Discharge Over Notches Apparatus

REQUEST CALLBACK

Discharge Over Notches Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 24,000 / PieceGet Latest Price

Product Details:
Power SourceElectric
Power0.5 kW
Voltage220V AC
Floor Area1.5 x 0.75 ml
Channel Test Section Size600 x 250 x 180 mm
Sump Tank Capacity50 Ltrs
PhaseSingle Phase

The setup consists of a channel having sufficient length and width in which water is supplied from the bottom. Required Notch is fitted at one end of this channel. A pointer gauge with Vernier scale is fitted to measure the height of fluid in flow channel. Arrangement for fixing interchangeable notches is made. Set of three notches, i.e. rectangular notch, 60 V notch & 45 V notch is provided along with the set-up. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stopwatch.

Experimentation:
  • To determine co-efficient of discharge (Cd) through
  • V notch 45°
  • V notch 60°
  • Rectangular Notch

Utilities Required:
  • Water Supply
  • Drain

Technical Details:

  • Notches: Material Brass
  • Rectangular Notch
  • 45° V Notch
  • 60° V Notch
  • Pointer Gauge: With Vernier scale
  • Water Circulation: FHP Pump Crompton makes
  • Flow Measurement: Using Measuring Tank with Piezometer, Capacity 25 Ltrs
  • Stop Watch: Electronic

Control Panel Comprises of:
  • Standard make On/Off Switch, Mains Indicator, etc
  • Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus Tanks and Channel will be made of Stainless Steel
  • The whole set-up is well designed and arranged in a good quality painted structure.


Additional Information:

  • Item Code: SHD-03
  • Delivery Time: 5-8 days
  • Packaging Details: wooden boxes are used if required
Yes! I am interested

Impact of Jet On Vanes

REQUEST CALLBACK

Impact of Jet On Vanes
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 30,000 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
UsageLaboratory
Sump Tank Capacity50 Ltrs
PhaseSingle Phase
Power0.5 kW
Power SourceElectric
Voltage220V AC
Floor Area1.5 x 0.75 m

The setup consists of a clear Acrylic fabrication section. Water is fed through a nozzle and discharged vertically to strike a target carried on a stem, which extends through the cover. A weight carrier is mounted on the upper end of the stem. The dead weight of the moving parts is counter balanced by a compression spring. The vertical force exerted on the target plate is measured for applied weights. Two targets cups are provided with the setup (flat plate and hemispherical cup).

Experimentation:
  • To measure the force developed by a jet of water upon a target (Hemispherical cup or Flat Plate) and Comparison with the forces predicted by the momentum theory

Utilities Required:
  • Water Supply
  • Drain

Technical Details:
  • Target (2 Nos.): Flat Plate and Hemispherical Cup
  • Nozzle: Material Brass
  • Jet Enclosure: Made of Acrylic
  • Water Circulation: FHP Pump, Standard make
  • Flow Measurement: Using Measuring Tank with Piezometer, Capacity 25 Ltrs
  • Stop watch: Electronic

Control Panel Comprises of:
  • Standard make On/Off Switch, Mains Indicator, etc
  • Instruction Manual: An ENGLISH instruction manual will be provided along
  • with the ApparatusTanks will be made of Stainless Steel
  • The whole set-up is well designed and arranged in a good quality painted structure.


Additional Information:

  • Item Code: SHD-04
  • Port of Dispatch: NEW DELHI
  • Production Capacity: 30 UNITS
  • Delivery Time: 5-8 days
  • Packaging Details: wooden boxes are used if required
Yes! I am interested

View PDF

Impact Of Jet On Vanes With Data Logging Facility

REQUEST CALLBACK

Impact Of Jet On Vanes With Data Logging Facility
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 65,000 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Power SourceElectric
Power0. 5 kW
PhaseSingle Phase
Floor Area1. 5 x 0. 75 m
Voltage220V AC

The setup consists of a clear acrylic fabrication section. Water is fed through a nozzle and discharged vertically to strike a target carried on a stem, which extends through the cover. A weight carrier is mounted on the upper end of the stem. The dead weight of the moving parts is counter balanced by a compression spring. The vertical force exerted on the target plate is measured for applied weights. Two targets are provided with the setup (flat plate and hemispherical cup). The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of labview of national instruments, usa. This software is compatible to interfacing unit designed by superb technologies . This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in excel etc.

Experimentation:
  • To measure the force developed by a jet of water upon a target (hemispherical cup or flat plate) and comparison with the forces predicted by the momentum theory.

Utilities required:
  • Water supply.
  • Drain.
  • Computer system: pentium iv with dvd drive, windows 7, ms-office pre-loaded. One usb slot required in pc for data acquisition card.

Technical Details:
  • Target (2 nos. ): flat plate and hemispherical cup
  • Nozzle: material brass
  • Jet enclosure: made of acrylic
  • Water Circulation: fhp pump, standard make
  • Flow Measurement: by using flow sensor
  • Force measurement: by load cell
  • Sump Tank: capacity 50 ltrs.
  • Stop Watch: electronic.
  • Control Panel comprises of: standard make on/off switch, mains indicator, etc.
  • Tanks will be made of stainless steel.
  • An english instruction manual consisting of experimental procedures, block diagram etc. Will be provided along with the apparatus
  • The whole set-up is well designed and arranged on a rigid structure painted with industrial pu paint.


Additional Information:

  • Item Code: SHD-04C
  • Delivery Time: 5-8 days
  • Packaging Details: wooden boxes are used
Yes! I am interested

Losses in Pipe Fittings Apparatus

REQUEST CALLBACK

Losses in Pipe Fittings Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 22,000 / PieceGet Latest Price

Product Details:
Power SourceElectric
Power0.5 kW
Voltage220V AC
Sump Tank Capacity50 Ltrs
PhaseSingle Phase
Floor Area1.5 x 0.75 m

The setup consists of 2 pipes of different diameters, which are connected in parallel. Pressure tapings are provided on each pipe to measure the pressure losses with the help of a Differential Manometer. Control valves are fitted on each pipe, which enables to use one pipe at a time for experiment. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve And by-pass valve are fitted in water line to conduct the Experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

Experimentation:

  • To determine loss of head in the fittings at various water flow rates
  • To measure the loss coefficient for the pipe fittings

Utilities Required:
  • Water Supply (Initial Fill)
  • Drain

Technical Details:

  • Manometer Fluid: Mercury (Hg) - 250 gm
  • Sudden Enlargement: From 15 mm to 25 mm
  • Sudden Contraction: From 25 mm to 15 mm
  • Bend: ½”
  • Elbow: ½”
  • Ball valve: ½”
  • Gate valve: ½”
  • Water Circulation: FHP Pump, Crompton makes
  • Flow Measurement: Using Measuring Tank with Piezometer, Capacity 25 Ltrs
  • Pressure Drop Measurement: Differential Manometer
  • Stop Watch: Electronic

Control Panel Comprises of:
  • Standard make On/Off Switch, Mains Indicator, etc
  • Instruction Manual: An English instruction manual will be provided along with the Apparatus Tanks will be made of Stainless Steel
  • The whole set-up is well designed and arranged in a good quality painted structure.


Additional Information:

  • Item Code: SHD-05
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer)
  • Delivery Time: 5-8 days
  • Packaging Details: wooden boxes are used if required
Yes! I am interested

Venturimeter And Orifice Meter Test Rig

REQUEST CALLBACK

Venturimeter And Orifice Meter Test Rig
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 24,000 / PieceGet Latest Price

Product Details:
Minimum Order Quantity1 Piece
Frequency50 Hz
Current5-15 amp
Floor Area Required1.5 x 0.75 m
Manometer Fluid250 gm Mercury (Hg)
Sudden Enlargement15 to 25 mm
Sudden Contraction25 to 15 mm
PhaseSingle Phase
Power SourceElectric
Sump Tank Capacity50 Ltrs
Voltage220V AC

The apparatus consists of two pipelines emerging out from a common manifold. One pipe line contains a Venturimeter and other contains an Orifice. The pressure tapings from the Venturimeter and orifice meter are taken to differential manometer to measure pressure difference. The Venturimeter and Orifice meter are connected in parallel and any one of them can be put in operation by operating valves provided at the downstream. The flow can also be regulated by these valves. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

Experimentation:

  • To demonstrate the use of Venturimeter & Orifice meter as flow meters.
  • To determine co-efficient of discharge through Venturimeter and Orifice meter.


Utilities Required
:

  • Water Supply (Initial Fill).
  • Floor Drain Required.
  • Mercury (Hg) for manometer (250 gm).


Other Details:

  • Bend: ½”
  • Elbow: ½”
  • Ball valve: ½”
  • Gate valve: ½”
  • Water Circulation: FHP Pump, Crompton makes.
  • Flow Measurement: Using Measuring Tank with Piezometer, Capacity 25 Ltrs.
  • Pressure Drop Measurement: Differential Manometer
  • Stop Watch: Electronic.


Control Panel Comprises of:

  • Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.


Additional Information:

  • Item Code: SSD-07
  • Delivery Time: 5-8 days
  • Packaging Details: wooden boxes are used if required
Yes! I am interested

Venturi Meter Orifice Meter And Rotameter Test Rig

REQUEST CALLBACK

Venturi Meter Orifice Meter And Rotameter Test Rig
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 24,000 / PieceGet Latest Price

Product Details:
Power SourceElectric
Frequency50 Hz
Current5-15 Amp
Floor Area1.5 0.75 m
Sump Tank Capacity50 Liter
Voltage220 V Ac
PhaseSingle Phase

The apparatus consists of three pipelines emerging out from a common manifold. One pipe line contain a Venturimeter, second contains an Orifice and third pipe line contains a Rota meter. The pressure tapings from the Venturimeter and Orifice meter are taken to differential manometer to measure pressure difference. The Venturimeter, Orifice meter and Rota meter are connected in parallel and any one of them can be put in operation by operating valves provided at the

downstream. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank & stop watch.

Experimentation:

  • To determine the co-efficient of discharged through Venturimeter and orifice meter.
  • To measure discharge through Venturimeter, Orifice meter and Rotameter
  • To calibrate the Rotameter.


Utilities Required
:

  • Water Supply (Initial Fill).
  • Floor Drain required.

Technical Details
:
  • Venturimeter: Material Clear Acrylic compatible to 1”Dia. Pipe.
  • Orificemeter: Orifice plate made of Stainless Steel and housing made of Clear Acrylic compatible to 1” Dia. Pipe.
  • Rota meter: Compatible Range. Eureka makes.
  • Water Circulation: FHP Pump, Crompton makes.
  • Flow Measurement: Using Measuring Tank (Capacity 25 ltrs.) and Electronic Stop Watch.
  • Control Panel Comprises of: Standard makes On/Off Switch, Mains Indicator, etc.
  • Instruction Manual: An English instruction manual will be provided along With the Apparatus.
  • Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.


Additional Information:

  • Item Code: SHD-08
  • Delivery Time: 5-8 days
  • Packaging Details: wooden boxes are used if required.
Yes! I am interested

Reynolds Apparatus

REQUEST CALLBACK

Reynolds Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 22,000 / PieceGet Latest Price

Product Details:
Current5-15 amp
Floor Area Required1.5 x 0.75 m
PhaseSingle Phase
Sump TankCapacity 60 Ltrs
Power SourceElectric
Voltage220 V AC
Frequency50 Hz

The apparatus consists of a glass tube with one end having bell mouth entrance; connected to a constant head water tank, at the other end a valve is provided to vary the flow rate. The tank is of sufficient capacity to store water. A capillary tube is introduced centrally in the bell mouth for feeding dye from a small container placed at the top of tank, through polythene tubing. By varying the rate of flow, the Reynold's number is changed. This also changes the type of flow. Visual observation of dye (Thread) will indicate the type of flow, which can be confirmed from the Reynold's number computed. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line. Flow rate of water is measured with the help of measuring cylinder and stop watch.

Experimentation:
  • To determine the Reynold's number and hence the type of flow either laminar or turbulent.
  • To study transition zone.
  • friction factor vs. Reynolds No. Plot.


Utilities Required:

  • Water Supply (Initial Fill)
  • Floor Drain required

Specifications
:
  • Chemical Required: Dye (KMnO4) - 10 gm.
  • Tube: Material Borosilicate Glass.
  • Dye vessel: Material Stainless Steel, Suitable Capacity.
  • Capillary Tube: Material Copper/Stainless Steel.
  • Constant Head Water Tank: Capacity 40 Ltrs.
  • Water Circulation: FHP Pump, Champion/ godrej make.
  • Flow Measurement: Using Measuring Cylinder.
  • Stop Watch: Electronic.
  • Control Panel Comprises of: Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual: An ENGLISH instruction manual will be provided along.


Additional Information:

  • Item Code: SHD-10
  • Delivery Time: 5-8 days
  • Packaging Details: wooden boxes are used if required
Yes! I am interested

Cavitation Apparatus

REQUEST CALLBACK

Cavitation Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 28,000 / PieceGet Latest Price

Product Details:
Floor Area Required1.5 x 1 m
Vacuum Gauge0-760 mmHg
Sump Tank Capacity60 liters
Pressure Gauge0-4 kg/cm2

The apparatus has been designed to demonstrate the phenomena of Cavitation. The present set-up
consists of a test section made of Acrylic having conversion and diversion section. Pressure tapings at appropriate position are provided. This test section is having one control valve at upstream side to regulate the water flow rate. Two pressure gauges are connected to these taping which give the pressure readout at the time of flow passing through this test section. The unit is self-contained close circuit type with sump tank, measuring tank and centrifugal pump. Flow through test section can be regulated with the help provided by-pass and control valve.

Experimentation:
  • To observe the phenomena of cavitation
  • To compare the theoretical and actual pressures at cavitation condition

Utilities Required:
  • Water Supply: Initial Fill
  • Floor Drain Required

Technical Details:
  • Test Section: Material Acrylic
  • Water Circulation: By Pump Crompton make.
  • Flow Measurement: Measuring Tank (Capacity : 40 liters) & Electronic Stop Watch
  • Control Panel Comprises of: Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual: An ENGLISH instruction manual will be provided along
  • with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.


Additional Information:

  • Item Code: SHD12
  • Delivery Time: 5-8 days
  • Packaging Details: wooden boxes are used if required.
Yes! I am interested

Metacentric Height Apparatus

REQUEST CALLBACK

Metacentric Height Apparatus
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 15,000 / PieceGet Latest Price

Product Details:
Water Tank Size550 x 500 x 400 mm
Front Window Tank MaterialGlass/Perspex
Floor Area1 x 0.6 m
Operating ModeManual

A pontoon is allowed to float in a small tank having a transparent side. Removable steel strips placed in the model for the purpose of changing the weight of the model. Displacement of weight is measured with the help of a scale. By means of a pendulum (consisting of a weight suspended to a long pointer) the angle of tilt can be measured on a graduated arc.For tilting the ship model, a cross bar with movable hanger is fixed on the model. Pendulum and graduated arc are suitably fixed at the center of the cross bar. A set of weights is supplied with the apparatus.

Experimentation:
  • Determination of the metacentric height and position of the metacentric height with angle of heel of ship model

Utilities Required:
  • Water Supply : Initial Fill
  • Drain required.

Specifications:
  • Pontoon: Size 300 x 300 mm (approx.) with a Horizontal Guide Bar for aliding weight and Removable Strips, Graduated Arc with Pointer with moveable hanger and set of weights.
  • Front Window of Tank: Made of Glass/Perspex.
  • A set of weights is supplied with the apparatus.
  • Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.


Additional Information:

  • Item Code: SHD-14
  • Delivery Time: 5-8 days
  • Packaging Details: wooden boxes are used if required
Yes! I am interested

Pitot Tube Setup

REQUEST CALLBACK

Pitot Tube Setup
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 24,000 / PieceGet Latest Price

Product Details:
Power SourceElectric
Voltage220V AC
Frequency50 Hz
Floor Area Required1.5 x 0.75 m
Sump Tank Capacity50 Ltrs
PhaseSingle Phase
Current5-15 amp

A Pitot tube is used to measure the local velocity at a given point in the flow stress. A pitot tube of standard design made of copper/SS is supplied and is fixed below vernies scale. The vernies scale is capable to measure the position of Pitot tube in transparent section. The pipe has a flow control valve to regulate the flow. An U-tube manometer is provided to determine the velocity head. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

Experimentation:

  • To find the point velocity at the center of a tube for different flow rates of water and calibrate the Pitot Tube
  • To plot velocity profile across the cross section of pipe

Utilities Required:
  • Water Supply (Initial Fill)
  • Floor Drain required
  • Chemical Required: CCl4 - 50 ml and Iodine pallets for CCl4


Specifications:

  • Pitot tube: Material Copper/SS of compatible size fitted with vernies scale.
  • Test Section: Material Clear Acrylic, compatible to 1” Dia. Pipe.
  • Water Circulation: FHP Pump, Crompton make.
  • Flow Measurement: Using Measuring Tank with Piezometer (Capacity 25 Ltrs) and Electronic Stop Watch.
  • Control Panel Comprises of: Standard make On/Off Switch, Mains Indicator, etc.
  • Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus Tanks will be made of Stainless Steel.
  • The whole set-up is well designed and arranged in a good quality painted structure.


    Additional Information:

    • Item Code: SHD-11
    • Delivery Time: 5-8 days
    • Packaging Details: wooden boxes are used if required.
    Yes! I am interested

    Center Of Pressure Apparatus

    REQUEST CALLBACK

    Center Of Pressure Apparatus
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 16,000 / PieceGet Latest Price

    Product Details:
    Bench Area Required0.5 x 0.25 m
    Distance Between Suspended Mass and Fulcrum275 mm
    Tank Capacity5 litres
    Height100 mm
    Depth160 mm

    The Centre of Pressure Apparatus has been designed to determine the static thrust exerted by a fluid on a submerged surface and allow comparison of the measured magnitude and position of this force with simple theory.A fabricated quadrant is mounted on a balance arm, which pivots on knife-edges. The knife-edges coincide with the centre of arc of the quadrant. Thus, of the hydrostatic forces acting on the quadrant when immersed, only the force on the rectangular end face gives rise to a moment about the knife-edges. The balance arm incorporates a balance pan for the weights supplied and an adjustable counterbalance. This assembly is mounted on top of an acrylic tank, which may be leveled by adjusting screwed feet. An indicator attached to the side of the tank shows when the balance arm is horizontal. Water is admitted to the top of the tank by a flexible tube and may be drained through a cock in the side of the tank. The water level is indicated on a scale on the side of the quadrant.

    Experimentation:
    • Determining the centre of pressure on both a submerged or partially submerged plane surface and comparison with the theoretical position

    Utilities Required:
    • Water Supply: Initial Fill
    • Drain

    Technical Details:

    • Tank capacity: 5 litres (approx)
    • Cross-sectional area of quadrant (torroid): (100 x 100) mm2
    • Instruction Manual: An English instruction manual will be povided along with the Apparatus
    • The whole set-up is well designed and arranged in a good quality painted structure.


    Additional Information:

    • Item Code: SHD-15
    • Delivery Time: 5-8 days
    • Packaging Details: wooden boxes are used if required
    Yes! I am interested

    Discharge Over Notches With Data Logging Facility

    REQUEST CALLBACK

    Discharge Over Notches With Data Logging Facility
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 90,000 / PieceGet Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    Channel Test Section Size600 x 250 x 180 mm
    Sump Tank Capacity50 Ltrs
    Power SourceElectric
    Power0.5 kW
    Voltage220V AC
    Floor Area1.5 x 0.75 m
    PhaseSingle Phase

    The setup consists of a channel having sufficient length and width in which water is supplied from the bottom. Required Notch is fitted at one end of this channel. A pointer gauge with Vernier scale is fitted to measure the height of fluid in flow channel. Arrangement for fixing interchangeable notches is made. Set of three notches, i.e. rectangular notch, 60° V notch & 45° V notch is provided along with the set-up. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stopwatch. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of National Instruments, USA. This software is compatible to interfacing unit designed by Superb. Technologies. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

    Experimentation:
    • To determine co-efficient of discharge (Cd) through:
    • V notch 45°
    • V notch 60°
    • Rectangular Notch.

    Utilities Required:
    • Water Supply.
    • Drain.
    • Computer System: Pentium IV with DVD Drive, Windows XP, MS-Office XP version pre-loaded. One USB slot required in PC For Data Acquisition Card.

    Technical Details:
    • Notches: Material Brass
    • Rectangular Notch
    • 45° V Notch
    • 60° V Notch
    • Level Measurement: By level transmitter.
    • Water Circulation: FHP Pump Crompton make.
    • Flow Measurement: By flow transmitter
    • Control Panel Comprises of: Standard make On/Off Switch, Mains Indicator, etc.
    • Tanks and Channel will be made of Stainless Steel.
    • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
    • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.


    Additional Information:

    • Item Code: SHD-03C
    • Delivery Time: 5-8 days
    • Packaging Details: wooden boxes are used
    Yes! I am interested

    Bend Meter Test Rig With Data Logging Facility

    REQUEST CALLBACK

    Bend Meter Test Rig With Data Logging Facility
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 90,000 / PieceGet Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    Power SourceElectric
    PhaseSingle Phase
    Voltage220V AC
    Frequency50 Hz
    Sump Tank Capacity50 ltrs
    Floor Area Required1. 5 x 0.75 m
    Current5-15 amp

    The apparatus consists of a pipeline that contains one bend meter. Pressure between tappings across test section can be measured by pressure sensor. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured by flow sensor. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of labview of national instruments, usa. This software is compatible to interfacing unit designed by superb technologies. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in excel etc.

    Experimentation:
    • To demonstrate the use of bend meter as flow meter.
    • To determine co-efficient of discharge for given bend meter.

    Utilities Required:
    • Water supply (initial fill).
    • Floor drain required.
    • Computer system : pentium iv with dvd drive, windows 7, ms-office pre-loaded. One usb slot required in pc for data acquisition card.

    Technical Details:
    • Bend meter : material stainless steel compatible to 1” dia. Pipe.
    • Water circulation : fhp pump, crompton make
    • Pressure measurement : by using pressure sensor,
    • Flow measurement : by using flow sensor,
    • Control panel comprises of :
    • Standard make on/off switch, mains indicator, etc.
    • Tanks will be made of stainless steel.
    • An english instruction manual consisting of experimental procedures, block diagram etc. Will be provided along with the apparatus
    • The whole set-up is well designed and arranged on a rigid structure painted with industrial pu paint.


    Additional Information:

    • Item Code: SHD-21C
    • Delivery Time: 5-8 days
    • Packaging Details: wooden boxes are used
    Yes! I am interested

    Darcy's Law Apparatus With Data Logging Facility

    REQUEST CALLBACK

    Darcy's Law Apparatus With Data Logging Facility
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 90,000 / PieceGet Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    Power SourceElectric
    Frequency50 Hz
    Current5-15 amp
    Floor Area Required1.5 x 0.75 m
    PhaseSingle Phase
    Sump Tank Capacity50 Ltrs
    Voltage220V AC

    The set-up consists of a Cylindrical test section filled with pourous medium. Pressure sensors are provided to measure the pressure drop. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured by flow sensor. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Lab view of National Instruments, USA. This software is compatible to interfacing unit designed by Superb Technologies. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

    Experimentation:
    • To verify Darcy’s law.
    • To find out the coefficient of permeability of a given medium.

    Utilities Required:
    • Water Supply (Initial Fill).
    • Floor Drain required.
    • Computer System : Pentium IV with DVD Drive, Windows 7, MS-Office pre-loaded. One USB slot required in PC for Data Acquisition Card.

    Technical Details:
    • Test Section: Material Stainless Steel Dia 120 mm approx., Height 500 mm.
    • Water Circulation: FHP Pump, Crompton make.
    • Flow Measurement: By Using Flow Sensor,
    • Pressure drop: By Using Pressure Sensor, Measurement
    • Control Panel Comprises of: Standard make On/Off Switches/Starter, Mains Indicator etc.
    • Tanks will be made of Stainless Steel.
    • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
    • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.


    Additional Information:

    • Item Code: SHD-19C
    • Delivery Time: 5-8 days
    • Packaging Details: wooden boxes are used
    Yes! I am interested

    Bernoulli's Theorm Apparatus With Data Logging Facility

    REQUEST CALLBACK

    Bernoulli's Theorm Apparatus With Data Logging Facility
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 90,000 / PieceGet Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    Power SourceElectric
    Floor Area1.5 x 0.75 m
    PhaseSingle Phase
    Power0.5 kW
    Voltage220 V AC

    The equipment is designed and fabricated to demonstrate the Bernoulli's theorem. It consists of a test section made of acrylic. It has convergent and divergent sections. Pressure tapings are provided at different locations in convergent and divergent section. Present set-up is self-contained water re-circulating unit, provided with a sump tank, centrifugal pump etc. An arrangement is done to conduct the experiment on different flow rates. Instrumentation has been done to measure the flow of water and pressure head at different location of test section. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed forunit. The software environment base is of Labview of National Instruments, USA. This software is compatible to interfacing unit designed by Superb Technologies. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

    Experimentation:
    • To verify Bernoulli's Theorem experimentally.
    • To plot the Total energy Vs distance.

    Technical Details:
    • Water Supply: Initial Fill.
    • Floor Drain.
    • Computer System: Pentium IV with DVD Drive, Windows 7, MS-Office pre-loaded. One USB slot required in PC for Data Acquisition Card.


    Additional Information:

    • Item Code: SHD-01C
    • Delivery Time: 5-8 days
    • Packaging Details: wooden boxes are used
    Yes! I am interested

    Darcy's Law Apparatus

    REQUEST CALLBACK

    Darcy's Law Apparatus
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 30,000 / PieceGet Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    Floor Area Required1.5 x 0.75 m
    Power SourceElectric
    PhaseSingle Phase
    Voltage220V AC
    Sump Tank Capacity50 Ltrs
    Frequency50Hz
    Current5-15 amp

    The set-up consists of a cylindrical test section filled with pourous medium. Pressure tappings are provided in the test section to measure the pressure drop with the help of differential manometer. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and bypass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

    Experimentation:

    • To verify Darcy’s law.
    • To find out the coefficient of permeability of a given medium.


    Utilities Required:

    • Water Supply (Initial Fill).
    • Floor Drain required.
    • Mercury (Hg) for manometer (250 gm)


    Technical Details:

    • Test Section: Material Stainless Steel Dia 120 mm approx., Height 500 mm.
    • Water Circulation: FHP Pump, Crompton make.
    • Flow Measurement: Using Measuring Tank (Capacity 25 Ltrs. (approx.) and Electronic Stop Watch
    • Control Panel Comprises of: Standard make On/Off Switches/Starter, Mains Indicator etc.
    • Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus Tanks will be made of Stainless Steel.
    • The whole set-up is well designed and arranged in a good quality painted structure.
    Yes! I am interested

    Hydraulic Bench

    REQUEST CALLBACK

    Hydraulic Bench
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 60,000 / UnitGet Latest Price

    Product Details:
    Minimum Order Quantity1 Unit
    Frequency50 Hz
    Power SourceElectric
    Motor Power0.5 HP
    Voltage320 V
    PhaseSingle Phase

    We are engaged in offering genuine quality Hydraulic Bench to the customers, as per the market demand. These hydraulic benches are manufactured in compliance with the international quality standards, employing latest technology and machinery. In addition to this, we make sure to deliver a flawless range of products at the clients' end by checking its quality on certain well-defined parameters.

    Some Of The Quality Attributes Are As Follows:

    • Compact design
    • Efficient functioning
    • Require less maintenance
    Yes! I am interested

    Fluid Friction Apparatus With Data Logging Facility

    REQUEST CALLBACK

    Fluid Friction Apparatus With Data Logging Facility
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 90,000 / PieceGet Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    Power SourceElectric
    Voltage220 V AC
    Current5-15 Amp
    Floor Area Required3 x 0.75 m
    PhaseSingle Phase
    Frequency50 Hz

    The present set-up is designed to study the friction head losses through pipes, fittings, and flow metering devices. Four different ID sizes smooth pipes and one artificially roughened pipe is connected in parallel. A valve arrangement is provided to operate the one pipe at a time. Various types of fitting are also fitted with pressure taps to conduct the experiment. Flow meters (Venturimeter and Orificemeter) is also accompanies the set-up. For water circulation and flow rate determination sump tank & measuring tank are provided. The educational software and data –logging package has been developed for this unit. It is compatible to interfacing unit designed by Superb Technologies. It provides a comprehensive educational software environment within which the investigations can be performed. This software runs in Windows XP. It is capable to tabulate the samples readings according to requirement of experiment under study and results obtained can be compared. Interfacing the set up with computer using software can do the real time data acquisition. Data can be transferred in Excel Files for further calculations, plotting graphs etc. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

    Experimentation:
    • Confirming the relationship between head loss due to fluid friction and velocity for flow of water
    • To determine the head loss associated with flow through pipe fittings.
    • To study the differential head devices for measurement of flow rate.

    Utilities Required:
    • Water Supply (Initial Fill)
    • Floor Drain Required.
    • Computer P IV, with DVD drive, Windows XP and MS Office XP version preloaded. One USB slot free for hardware.

    Technical Details:
    • Pipes (5 Nos.): 4 Smooth bore and one roughened bore. Size range between ID 4.5mm to 17 mm.
    • Fittings: 90° Bend (Small), 90° Bend (Large), 90° Elbow, 90° Mitre, 45° Elbow, 45° Y, 90° T, Sudden Enlargement & Contraction,
    • Valves: Gate Valve, Ball Valve, Globe Valve.
    • Flow Meters: Venturimeter, Orificemeter
    • DPT: For measuring differential pressure, 0-10000 mm of WC, output 4-20 mA
    • Pressure Tapings: As per requirement
    • Control Panel consists of: Standard make On/Off Switch, Mains Indicator, etc.
    • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
    • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.


    Additional Information:

    • Item Code: SHD23c
    • Delivery Time: 5-8 days
    • Packaging Details: wooden boxes are used
    Yes! I am interested

    Pitot Tube Setup With Data Logging Facility

    REQUEST CALLBACK

    Pitot Tube Setup With Data Logging Facility
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 90,000 / PieceGet Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    Power SourceElectric
    Voltage220V AC
    Current5-15 amp
    Floor Area Required1.5 x 0.75 m
    Sump Tank Capacity50 Ltrs
    PhaseSingle Phase
    Frequency50Hz

    A Pitot Tube is used to measure the local velocity at a given point in the flow stress. A pitot tube of standard design made of copper/SS is supplied and is fixed below vernies scale. The vernies scale is capable to measure the position of Pitot Tube in transparent section. The pipe has a flow control valve to regulate the flow. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured by flow sensor. The present set-up has a facility to interface the system with computer which enables to log the experimental data using computer. The educational software and data-logging package has been developed for unit. The software environment base is of Labview of NATIONAL INSTRUMENTS, USA. This software is compatible to interfacing unit designed by Superb Technologies. This software package provides a comprehensive educational software environment within which the investigations can be performed. This software is capable to tabulate the sample readings according to the requirement of experiment under study and results obtained can be compared. The real time data acquisition can be done by interfacing the set-up with computer using software. Software allows the user to have control on data logging, printing the stored data, preparing spread sheets in Excel etc.

    Experimentation:
    • To find the point velocity at the center of a tube for different flow rates of water and calibrate the Pitot Tube.
    • To plot velocity profile across the cross section of pipe.

    Utilities Required:
    • Water Supply (Initial Fill).
    • Floor Drain required.
    • Computer System: Pentium IV with DVD Drive, Windows 7, MS-Office pre-loaded. One USB slot required in PC for Data Acquisition Card.

    Technical Details:
    • Pitot Tube: Material Copper/SS of compatible size fitted with vernies scale.
    • Test Section: Material Clear Acrylic, compatible to 1” Dia. Pipe.
    • Water Circulation: FHP Pump, Crompton make.
    • Pressure Measurement: By Using Pressure Sensor,
    • Flow Measurement: By Using Flow Sensor,
    • Sump Tank: Capacity 50 Ltrs.
    • Control Panel Comprises of: Standard make On/Off Switch, Mains Indicator, etc.
    • Tanks will be made of Stainless Steel.
    • An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus
    • The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.


    Additional Information:

    • Item Code: SHD-11C
    • Delivery Time: 5-8 days
    • Packaging Details: wooden boxes are used
    Yes! I am interested

    Study Of Pressure Measurement - Fluid Mechanics Lab

    REQUEST CALLBACK

    Study Of Pressure Measurement - Fluid Mechanics Lab
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 15,000 / PieceGet Latest Price

    Product Details:
    Sump Tank Capacity60 Ltrs
    Power SourceElectric
    Voltage220V AC
    Floor Area Required1.5 X 0.75 m
    PhaseSingle phase
    Frequency50 Hz
    Current5-15 amp

    The set-up consists of different pressure measurement devices fitted in a pipe line, in which an Orifice is fitted to create the pressure difference. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line.

    Experimentation:

    • To demonstrate the working of different pressure measuring devices.
    • To measure the pressure and pressure difference by pressure gauge, single column manometer, UTube manometer & Inclined tube manometer.


    Utilities Required:

    • Water Supply (Initial fill)
    • Floor Drain required.
    • Mercury (Hg) for manometer (750 gm).


    Technical Details:

    • Single Well Manometer: Single Tube Type.
    • Differential Manometer: U Tube Type.
    • Sensitive Manometer. : Inclined Tube Type.
    • Pressure Gauge. : Bourdon Type
    • Water Circulation: FHP Pump, Champion makes.
    • Instruction Manual: An ENGLISH instruction manual will be provided along With the Apparatus Tanks will be made of Stainless Steel.
    • The whole set-up is well designed and arranged in a good quality painted structure.

    Control Panel Comprises of:

    • Standard make On/Off Switch, Mains Indicator, etc.


    Additional Information:

    • Item Code: SHD-20
    • Delivery Time: 5-8 days
    • Packaging Details: wooden boxes are used if required.
    Yes! I am interested

    Nozzle Meter Test Rig

    REQUEST CALLBACK

    Nozzle Meter Test Rig
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 25,000 / PieceGet Latest Price

    Product Details:
    Power SourceElectric
    PhaseSingle Phase
    Voltage220V AC
    Frequency50 Hz
    Floor Area Required1.5 x 0.75 m
    Current5-15 amp

    The apparatus consists of a Nozzle meter made of stainless steel houses in Acrylic Test Section. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

    Experimentation:

    • To measure discharge through Nozzle meter.
    • To calculate co-efficient of discharge for nozzle meter.


    Utilities Required:

    • Water Supply (Initial Fill).
    • Floor Drain required.
    • Mercury (Hg) for manometer(250 gm)

    Technical Details
    :
    • Nozzle meter: Nozzle of Stainless Steel, Housing of Clear Acrylic. Compatible to 1” dia pipe.
    • Water Circulation: FHP Pump, Crompton make
    • Flow Measurement: Using Measuring Tank, (Capacity 25 Ltrs. (approx.) and Electronic Stop Watch
    • Sump Tank: Capacity 55 Ltrs. (approx.)
    • Control Panel Comprises of: Standard make On/Off Switches, Mains Indicator, etc.
    • Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus Tanks will be made of Stainless Steel.
    • The whole set-up is well designed and arranged in a good quality painted structure.


    Additional Information:

    • Item Code: SHD-09
    Yes! I am interested

    Bend Meter Test Rig

    REQUEST CALLBACK

    Bend Meter Test Rig
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 25,000 / PieceGet Latest Price

    Product Details:
    Power SourceElectric
    PhaseSingle Phase
    Voltage220V AC
    Frequency50 Hz
    Sump Tank Capacity50 Ltrs
    Floor Area Required1.5 m x 0.75 m
    Current5-15 amp

    The apparatus consists of a pipeline that contains one Bend meter. The pressure tapings from the Bend meter is taken to differential manometer to measure pressure difference. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

    Experimentation:

    • To demonstrate the use of Bend meter as flow meter.
    • To determine co-efficient of discharge for given Bend meter.


    Utilities Required
    :

    • Water Supply (Initial Fill).
    • Floor Drain required.
    • Mercury (Hg) for manometer (250 gm).


    Technical Details:

    • Bend meter: Material Stainless steel Compatible to 1” Dia. Pipe.
    • Water Circulation: FHP Pump, Crompton make
    • Flow Measurement: Using Measuring Tank (Capacity 25 Ltrs. (approx.) and Electronic Stop Watch
    • Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus Tanks will be made of Stainless Steel.
    • The whole set-up is well designed and arranged in a good quality painted structure.


    Additional Information:

    • Item Code: SHD21
    Yes! I am interested

    Rotameter Test Rig

    REQUEST CALLBACK

    Rotameter Test Rig
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 22,000 / PieceGet Latest Price

    Product Details:
    Power SourceElectric
    PhaseSingle Phase
    Voltage220V AC
    Frequency50 Hz
    Sump Tank Capacity50 Ltrs
    Floor Area Required1.5 x 0.75 m
    Current5-15 amp

    The apparatus consists of three pipelines emerging out from a common manifold. One pipe line contain a Venturimeter, second contains an Orifice and third pipe line contains a Rota meter. The pressure tapings from the Venturimeter and Orifice meter are taken to differential manometer to measure pressure difference. The Venturimeter, Orifice meter and Rota meter are connected in parallel and any one of them can be put in operation by operating valves provided at the
    downstream. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank & stop watch.

    Experimentation:
    • To determine the co-efficient of discharged through Venturimeter and orifice meter
    • To measure discharge through Venturimeter, Orifice meter and Rotameter
    • To calibrate the Rotameter

    Utilities Required:
    • Water Supply (Initial Fill)
    • Floor Drain required

    Technical Details:

    • Venturimeter: Material Clear Acrylic compatible to 1”Dia. Pipe
    • Orificemeter: Orifice plate made of Stainless Steel and housing made of Clear Acrylic compatible to 1” Dia. Pipe
    • Rota meter: Compatible Range. Eureka makes
    • Water Circulation: FHP Pump, Crompton makes
    • Flow Measurement: Using Measuring Tank (Capacity 25 ltrs.) and Electronic Stop Watch
    • Control Panel Comprises of: Standard makes On/Off Switch, Mains Indicator, etc
    • Instruction Manual: An English instruction manual will be provided along With the Apparatus
    • Tanks will be made of Stainless Steel
    • The whole set-up is well designed and arranged in a good quality painted structure


    Additional Information:

    • Item Code: SHD-24
    • Delivery Time: 5-8 days
    • Packaging Details: wooden boxes are used if required.
    Yes! I am interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Superb Technologies
    Abhishek Aggarwal (Managing Director)
    No. 80, HSIIDC Industrial Area , Ambala Cantt,
    Ambala - 133001, Haryana, India
    Call Us: 
    Call Response Rate: 75%
    Share Us :
    F G T L



    Home  |   About Us   |  Our Products  |  Site Map  |   Contact Us   |   Mobile Site

    © Superb Technologies. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Superb Technologies